QDHN-LD®️ Pressure Hoses exceed original equipment performance standards (SAE J188, SAE J189) with a max working pressure of 1,500 psi a burst pressure rating of 8,700 psi and a tensile strength of 1,600 lb. Every hose is subjected to a quality assurance test before leaving the factory.
All tubing is manufactured from high-grade steel and electroplated with an environmental coating , delivering superior corrosion and rust resistance against all kinds of elements.
High-Pressure Line: A smooth bore inner tube of suitable synthetic rubber material, reinforced with two layers of braided fabric and covered with a synthetic rubber outer cover.
Low-Pressure Line: The hose embodies a smooth bore inner tube of suitable synthetic rubber material, reinforced with one layer of braided fabric and covered with a synthetic rubber outer cover.
Pressure Line Hose
|End 1 Fitting Material:|
|End 1 Fitting Type:|
Banjo - 14mm
|End 2 Fitting Material:|
|End 2 Fitting Type:|
Male O-Ring - 16mm
|Total Length 1 (In):|
6-Cyl. 2.5 L
OE Numbers: 32416750156, 32416764726, 32416774215